Category: Uncategorized

9.00 USD

1/2″ / 13mm Solid TurboGlow Sunshine Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong orange/yellow glow.

Pictured: Glow in total darkness, Day color no glow, Day color no glow, Glow with daylight, Glow with BlackLight and Day light, and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

9.00 USD

1/2″ / 13mm Solid TurboGlow Sapphire Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong dark blue glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

9.00 USD

1/2″ / 13mm Solid TurboGlow Yellow Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong bright yellow glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

9.00 USD

1/2″ / 13mm Solid TurboGlow Lava Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong pink/orange glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On. Last 2 comparison pictures: Glow in total darkness and Day color no glow

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

9.00 USD

1/2″ / 13mm Solid TurboGlow Amethyst Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong purple glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

This glow material only charges under UV light / Blacklight. While other colors are able to be charged with sunlight purple is not.

66.75 USD

1/4″ / 6.35mm thick Red / Black Carbon Fiber plate material, ready to be used for knife scales or other products. It is alternating layers of a hybrid fabric that is red dyed fiber glass and carbon fiber, and regular carbon fiber layers. With the hybrid material as the top and bottom layer.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This carbon fiber is sold as a set of 2 pieces, each with a size of 2×6″ or 1.5×6″. Choose your requested size in the scroll down menu. Other sizes on request possible. Currently only available in blue, toxic green and red, other colors are available and can be made but do take 2-3 weeks to be made and processed. See the colored “rainbow” pic for how the other available colors look like. Currently available colors are: blue, red, white, green, toxic green and orange all for the same price, yellow is available for an added fee.

The colors in this material are made from specialty dyed fiberglass fabrics. It is a very high quality, the colors are very rich and vibrant, and it machines very well into a very beautiful finish. It is NOT kevlar. The carbon fiber is a high quality, and I use water clear transparent resins to make sure the colors stay as rich and nice as they naturally are. The materials as you see are “all natural”. No finish coatings, no polishing job or any other aid was used to make them look better then they are. What you see is what you get! 🙂

All my carbon fiber is handmade with a custom developed high tech process so that the material has extremely high quality and absolutely NO voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures and is very hard so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product. To this date though, no customer has yet come to me that has found voids in a material I made and wanted to claim a replacement product!

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

14.25 USD

1/8″ / 4mm Solid TurboGlow Electric Pink Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong electric pink glow.

Pictured: Glow in total darkness, Day color no glow, Day color no glow, Glow with daylight, Glow with BlackLight and Day light, and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

14.25 USD

1/8″ / 4mm Solid TurboGlow Amethyst Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong purple glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

This glow material only charges under UV light / Blacklight. While other colors are able to be charged with sunlight purple is not.

15.25 USD

1/4″ 0.25″ 6.35mm thick Blue & Black Hybrid Carbon Fiber plate material. This carbon fiber is sold as a single piece of plate.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

It is alternating layers of a hybrid fabric that is blue dyed fiber glass and carbon fiber, and regular carbon fiber layers. With the hybrid material as the top and bottom layer.

The colors in this material are made from specialty dyed fiberglass fabrics. It is a very high quality, the colors are very rich and vibrant, and it machines very well into a very beautiful finish. It is NOT kevlar. The carbon fiber is a high quality, and I use water clear transparent resins to make sure the colors stay as rich and nice as they naturally are. The materials as you see are “all natural”. No finish coatings, no polishing job or any other aid was used to make them look better then they are. What you see is what you get! 🙂

All my carbon fiber is handmade with a custom developed high tech process so that the material has extremely high quality and absolutely NO voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures and is very hard so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product. To this date though, no customer has yet come to me that has found voids in a material I made and wanted to claim a replacement product!

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

66.75 USD

1/4″ / 6.35mm thick Yellow / Black Carbon Fiber plate material, ready to be used for knife scales or other products. It is alternating layers of a hybrid fabric that is yellow dyed fiber glass and carbon fiber, and regular carbon fiber layers. With the hybrid material as the top and bottom layer.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This carbon fiber is sold as a set of 2 pieces, each with a size of 2×6″ or 1.5×6″. Choose your requested size in the scroll down menu. Other sizes on request possible. Currently available in blue, toxic green, red, white and yellow. Orange can also be made on request.

The colors in this material are made from specialty dyed fiberglass fabrics. It is a very high quality, the colors are very rich and vibrant, and it machines very well into a very beautiful finish. It is NOT kevlar. The carbon fiber is a high quality, and I use water clear transparent resins to make sure the colors stay as rich and nice as they naturally are. The materials as you see are “all natural”. No finish coatings, no polishing job or any other aid was used to make them look better then they are. What you see is what you get! 🙂

All my carbon fiber is handmade with a custom developed high tech process so that the material has extremely high quality and absolutely NO voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures and is very hard so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product. To this date though, no customer has yet come to me that has found voids in a material I made and wanted to claim a replacement product!

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

9.00 USD

1/2″ / 13mm Solid TurboGlow Electric Pink Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong electric pink/purple glow.

Pictured: Glow in total darkness, Day color no glow, Day color no glow, Glow with daylight, Glow with BlackLight and Day light, and Glow with BlackLight On in Dark.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

9.00 USD

1/8″, 1/4″, 1/2″ / 4 mm, 7 mm, 13 mm TurboGlow Carmine Glow In The Dark Glow Plate by CarbonWaves. This Color has a similar glow as Fire but the day color is more a true red color. Whereas Fire is a bit more of an orange red.
Pictured: Glow in total darkness, Day Color, Glow with Black Light on, Day light with Black Light on. Comparison with black light on, day colors

Ready to be used for your glow needs such as a knife liner, jewelry ring, EDC or anything that needs to feature a red/orange glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!