Category: Uncategorized

9.00 USD

1/8″, 1/4″, 1/2″ / 4 mm, 7 mm, 13 mm Solid TurboGlow Yellow Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong bright yellow glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

9.00 USD

1/8″, 1/4″, 1/2″ / 4 mm, 7 mm, 13 mm TurboGlow Lava Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong pink/orange glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On. Last 2 comparison pictures: Glow in total darkness and Day color no glow

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

12.75 USD

5/8″ / 16 mm Solid TurboGlow White Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 5/8″ / 16 mm

Ready to be used for your glow needs such as beads or anything that needs to feature a very strong white glow.

Pictured: Glow in total darkness and Day color no glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

10.00 USD

5/8″ / 16 mm Solid TurboGlow Yellow Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 5/8″ / 16 mm

Ready to be used for your glow needs such as a bead or anything that needs to feature a very strong yellow glow.

Pictured: Glow in total darkness, Glow with daylight, Day color no glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

10.00 USD

5/8″ / 16 mm Solid TurboGlow Orange Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 5/8″ / 16 mm

Ready to be used for your glow needs such as a bead or anything that needs to feature a very strong orange glow.

Pictured: Glow in total darkness, Glow with daylight, Day color no glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

10.00 USD

5/8″ / 16 mm Solid TurboGlow Fire Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 5/8″ / 16 mm

Ready to be used for your glow needs such as a bead or anything that needs to feature a very strong red/orange fire glow.

Pictured: Glow in total darkness, Glow with daylight, Day color no glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

12.00 USD

1″ / 26 mm Solid TurboGlow Aqua Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 1″ / 26 mm .

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong blue/green (aqua) glow.

Pictured: Glow in total darkness, Glow with daylight, Day color no glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

12.00 USD

1″ / 2.5 cm Solid TurboGlow Ultra Green Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 1″ / 2.5 cm

Ready to be used for your glow needs such as a ring or anything that needs to feature an even strong green glow than regular green turboglow.

Pictured: Glow in total darkness, Glow with daylight, Day color no glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

18.25 USD

1/8″, 1/4″, 1/2″ / 4 mm, 7 mm, 13 mm TurboGlow Ruby Red Glow In The Dark Glow Plate by CarbonWaves. This Color has a red glow very rare, but unfortunately it doesn’t last for long. The Glow is a true red glow which is very rare in glow colors. It is also a very true red day color.
Pictured: Glow in total darkness, Day Color, Glow with Black Light on, Day light with Black Light on. Comparison with black light on, day colors

Ready to be used for your glow needs such as a knife liner, jewelry ring, EDC or anything that needs to feature a red glow.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

49.25 USD

1/4″ / 7 mm thick TurboGlow Knife Scale Sets. Each set contains 2 pieces of a single color in the selected size. The pictures are to show the color options currently available. You will only receive 2 pieces of your chosen color in the size you choose.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

You can find more pictures of each color in the TurboGlow Plate section. There you can find Day, Day Glow, BlackLight Glow and etc pictures of each color.

This TurboGlow Knife Scale Set is sold with 2 pieces of the color selected in the size selected! Select the color and size that you would like in the scroll down menu! If you want a larger size and it is not listed please contact us for options.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

18.75 USD

1 1/2″ 1.5″ 38.1mm thick RogueWaves Carbon Fiber plate material, ready to be used for luxury carbon fiber products. SOLD BY THE SQUARE INCH

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

This is the same high quality as our CW Carbon Fiber plates, but made with much thicker fabric giving you larger waves.

Handmade with a custom developed high tech process so that the material has extremely high quality and absolutely no voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I would like this material to be affordable for all carbon fiber artists and hobbyists and I encourage small sample purchases so I sell this material per square inch. In the scroll down you can select any amount and size that you want.
I have an easy consistent affordable price per inch to make purchases easy, and for larger orders feel free to contact me about discount options.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product.
To this date, no customer has come to me requesting this though.

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me! For purchases over 6×6″ size I can make a custom plate for you with only a small added charge! For the same total thickness and color thickness.

16.75 USD

1/4″ / 7mm GlowWaves Rainbow Plate by CarbonWaves.

Ready to use solid GlowWaves plate for you to use in your glow products such as: rings, knives, EDC or anything that needs to feature a very strong rainbow glow wave. GlowWaves differs from TurboGlow because it has fabric layers added to the glow and the resin for improved strength. Because of this difference you can get a texture when contouring and shaping it.

Pictured: Glow in total darkness, Day color no glow, and Glow with BlackLight On.

*EU buyers: Sales tax is not included in the price. After checkout you will receive a separate invoice for the sales tax based off your EU country’s tax rate.

Our GlowWaves glow material is a high quality and very strong material that is perfect if you want a beautiful glow wave and texture. This high quality solid glow wave plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This GlowWaves material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!