Posted on

1/8", 1/4", 1/2", 1" Fire TurboGlow Glow In The Dark Plate CarbonWaves by CarbonWaves

9.00 USD

1/8″, 1/4″, 1/2″, 1″ / 4 mm, 7 mm, 13 mm, 25 mm Solid TurboGlow Fire Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a day color of red and a glow of orange.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On. Last 2 comparison pictures: Glow in total darkness and Day color no glow

CarbonWaves creates high quality luxury materials for makers of things.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

1/8" CW Carbon Fiber Knife Scale Set of 2 CarbonWaves Knife Blank by CarbonWaves

38.25 USD

1/8″ / 3.2mm thick Carbon Fiber plate material, ready to be used for knife scales or other products. Made from a hybrid fabric composed of colored glass fiber and carbon fiber fabric.

CarbonWaves creates high quality luxury materials for makers of things.

This carbon fiber is sold as a set of 2 pieces, each with a size of 2×6″ or 1.5×6″. Choose your requested size in the scroll down menu. Other sizes with length of 6″ on request possible. Larger economy sizes in 6×6″, 6×12″ or 12×12″ also available

The carbon fiber fabric used is of a very high quality, and I use water clear transparent resins to make sure the colors stay as rich and nice as they naturally are. The materials as you see are “all natural”. No finish coatings, no polishing job or any other aid was used to make them look better then they are. What you see is what you get! 🙂

All my carbon fiber is handmade with a custom developed high tech process so that the material has extremely high quality and absolutely NO voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures and is very hard so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product. To this date though, no customer has yet come to me that has found voids in a material I made and wanted to claim a replacement product!

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

Posted on

1/8" Red & Black Carbon Fiber Knife Scale Set of 2 CarbonWaves Knife Blank by CarbonWaves

60.75 USD

1/8″ / 3.2mm thick Red and Black Carbon Fiber plate material, ready to be used for knife scales or other products. Made from a hybrid fabric composed of colored glass fiber and carbon fiber fabric.

CarbonWaves creates high quality luxury materials for makers of things.

This carbon fiber is sold as a set of 2 pieces, each with a size of 2×6″ or 1.5×6″. Choose your requested size in the scroll down menu. Other sizes with length of 6″ on request possible. Currently only available in blue, red, white and toxic green, other colors are available and can be made but do take 2-3 weeks to be made and processed. See the colored “rainbow” pic for how the other available colors look like. Currently available colors are: blue, red, white, green, toxic green, yellow and orange

The colors in this material are made from specialty dyed fiberglass fabrics. It is a very high quality, the colors are very rich and vibrant, and it machines very well into a very beautiful finish. It is NOT kevlar. The carbon fiber is a high quality, and I use water clear transparent resins to make sure the colors stay as rich and nice as they naturally are. The materials as you see are “all natural”. No finish coatings, no polishing job or any other aid was used to make them look better then they are. What you see is what you get! 🙂

All my carbon fiber is handmade with a custom developed high tech process so that the material has extremely high quality and absolutely NO voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures and is very hard so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product. To this date though, no customer has yet come to me that has found voids in a material I made and wanted to claim a replacement product!

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

Posted on

NEW 2 MM Yellow TurboGlow Glow In The Dark Plate CarbonWaves by CarbonWaves

25.00 USD

2 mm Solid TurboGlow Yellow Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong bright yellow glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

CarbonWaves creates high quality luxury materials for makers of things.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

1/4" Copper Carbon Fiber Plate CarbonWaves Carbon Fibre Sheet by CarbonWaves

16.75 USD

1/4″ 0.25″ 6.35mm thick Copper Carbon Fiber plate material, ready to be used for luxury carbon fiber products. SOLD IN VARIOUS SIZES

CarbonWaves creates high quality luxury materials for makers of things.

It is made from real copper and high quality carbon fiber. It will give a beautiful effect after sanding and machining. The copper is a beautiful combination with the carbon fiber, and because of the void free high quality it can be detailed very well! The copper is REAL copper and as such it will behave like actual copper so it will also tarnish and oxidize in the same way. This will give a beautiful effect to the products you create from this material.

The copper material also shows a bit on the surface of the top and bottom, but this is mostly a “bonus” of the material and is not a consistent effect. The copper on the inside of the layers is very consistent and this will come out very well after machining and sanding. ! The top surface has a high gloss look while the backside of this material has a peel ply texture.

Handmade with a custom developed high tech process so that the material has extremely high quality and absolutely no voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product.

I would like this material to be affordable for all carbon fiber artists and hobbyists and I encourage small sample purchases so I sell this material per square inch. In the scroll down you can select any amount and size that you want.
I have an easy consistent affordable price per inch to make purchases easy, and for larger orders feel free to contact me about discount options.

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

Posted on

NEW 1" Ocean Glow In the Dark Rod TurboGlow CarbonWaves by CarbonWaves

12.00 USD

1″ / 26 mm Ocean TurboGlow Glow In The Dark Glow Rod.
Sold per inch! Rod diameter is 1″ / 26 mm .
Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong blue/green (aqua) glow.

Pictured: Glow in total darkness, Glow with daylight, Day color no glow.
For Reference:
Ocean has a dark blue green day color and glows aqua.
Turquoise has a similar day color and glows green.
Sapphire is a dark blue day color and glows blue.

Turquoise
CarbonWaves creates high quality luxury materials for makers of things.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

1/8" Zebra Carbon Fiber Knife Scale Set of 2 CarbonWaves Handle Blank by CarbonWaves

49.50 USD

1/8″ / 3.2mm thick Zebra Carbon Fiber plate material, ready to be used for knife scales or other products. Made from side cut carbon fiber fabric.

CarbonWaves creates high quality luxury materials for makers of things.

This zebra carbon fiber is sold as a set of 2 pieces, in 1.5×6″ or 2×6″

This Zebra Carbon Waves material is made from a very thick plate of material and is cut sideways to create the layered “zebra style” effect. This shows the beautiful layers of the carbon fiber fabric on the surface of the material to really show of the “carbon waves” of the material very well!

The carbon fiber fabric used is of a very high quality and I use water clear transparent resins to make sure the colors stay as rich and nice as they naturally are. The materials as you see are “all natural”. No finish coatings, no polishing job or any other aid was used to make them look better then they are. What you see is what you get! 🙂

All my carbon fiber is handmade with a custom developed high tech process so that the material has extremely high quality and absolutely NO voids. Not even microvoids, or any other imperfections. It has been cured at high temperatures and is very hard so it machines and polishes very well! It will give your products a very high quality finish and it can be processed well like other carbon fiber.

I provide a no voids guarantee on my carbon fiber plates! I am totally confident that you will not find any voids or even microvoids in my products, but if you ever find any small voids, I will give you a free replacement product. To this date though, no customer has yet come to me that has found voids in a material I made and wanted to claim a replacement product!

I sell high quality carbon fiber sheets in many colors and variations and thicknesses. All in high quality, all very unique. Please check my shop for all the colors that I have currently available. If you have a specific color or color combination in mind or thickness, please feel free to ask me!

Posted on

5/8" Sea Glow In the Dark Rod TurboGlow CarbonWaves by CarbonWaves

10.00 USD

5/8″ / 16 mm Solid Sea TurboGlow Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 5/8″ / 16 mm

Ready to be used for your glow needs such as a ring or anything that needs to feature an aqua glow.
Pictured: Glow in total darkness, Day color no glow, and Glow with Black Light on.

CarbonWaves creates high quality luxury materials for makers of things.

This rod has a day color that is a light to medium aqua color and glows a strong bright aqua color that is slightly darker than the Aqua TurboGlow. Sea TurboGlow has a bright blue green glow and you have a light to medium blue green day color.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

1" Sea Glow In the Dark Rod TurboGlow CarbonWaves by CarbonWaves

12.00 USD

1″ / 26mm Solid Sea TurboGlow Glow In The Dark Glow Rod.

Sold per inch! Rod diameter is 1″/26mm .

Ready to be used for your glow needs such as a ring or anything that needs to feature an aqua glow.
Pictured: Glow in total darkness, Day color no glow, and Glow with Black Light on.

CarbonWaves creates high quality luxury materials for makers of things.

This rod has a day color that is a light to medium aqua color and glows a strong bright aqua color that is slightly darker than the Aqua TurboGlow. Sea TurboGlow has a bright blue green glow and you have a light to medium blue green day color.

This high quality solid glow rod material is produced with only the best ingredients. Each is made with a custom production process to create the very strongest glow material possible with the highest glow possible. While remaining very easy to machine.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

1/8", 1/4", 1/2", 1" Aqua TurboGlow Glow In The Dark Plate CarbonWaves by CarbonWaves

9.00 USD

1/8″, 1/4″, 1/2″, 1″ / 4 mm, 7 mm, 13 mm, 25 mm TurboGlow Aqua Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong aqua glow.

Pictured: Glow in total darkness, Day color no glow, Glow with daylight and Glow with BlackLight On.

CarbonWaves creates high quality luxury materials for makers of things.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

NEW 2 MM Ruby Red TurboGlow Glow In The Dark Plate CarbonWaves by CarbonWaves

50.00 USD

2 mm TurboGlow Ruby Red Glow In The Dark Glow Plate by CarbonWaves. This Color has a red glow very rare, but unfortunately it doesn’t last for long. The Glow is a true red glow which is very rare in glow colors. It is also a very true red day color.
Pictured: Glow in total darkness, Day Color, Glow with Black Light on, Day light with Black Light on. Comparison with black light on, day colors

Ready to be used for your glow needs such as a knife liner, jewelry ring, EDC or anything that needs to feature a red glow.

CarbonWaves creates high quality luxury materials for makers of things.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!

Posted on

1/8", 1/4", 1/2" White Fireball TurboGlow Glow In The Dark Plate CarbonWaves by CarbonWaves

18.25 USD

1/8″, 1/4″, 1/2″ / 4 mm, 7 mm, 13 mm Solid TurboGlow White Fireball Glow In The Dark Glow Plate by CarbonWaves.

Ready to be used for your glow needs such as a ring or anything that needs to feature a very strong red/orangish glow.
This WhiteFireball TurboGlow is very special because it is white during daytime, but glows a Red/Orange color in the dark or when exposed to BlackLight! A very rare combination in glow materials!

Pictured: Glow in total darkness, Day color no glow, Day color no glow, Glow with daylight, Glow with BlackLight and Day light, and Glow with BlackLight On. Last 2 comparison pictures: Glow in total darkness and Day color no glow

CarbonWaves creates high quality luxury materials for makers of things.

This high quality solid glow plate material is produced with only the best materials. Each is made with a custom production process to create the very strongest glow material possible with the longest glow possible. While still remaining very machinable.

This material is composed from a high quality clear epoxy resin to allow as much light as possible into the material while keeping the colors very vibrant and the material strong! In our custom production process we push as much glow material in as possible to get the maximum amount of glow strength and duration! There is NO dilution in this material at all, unlike almost all other glow materials out there. This TurboGlow material will give you the highest glow possible and it will also give you hours of glow! So, at night your products will still look great and highly visible!

The glow material charges very fast in direct sunlight, but with a flashlight or any other light source you can charge it as well. Especially, if you use a UV flashlight it charges extremely fast and shows its glow color immediately!